EZ-Aim Stick on Adaptor
This adapter is for game cameras that do not have a 1/4 - 20 threaded insert on the bottom or back of the camera. It requires a 3 inch x 1.75 inch flat surface on the back of the camera. Installation is quick and easy:Adaptor will stick to anything with a 3M Adhesive mount and won't come off. Great for surviellance as well. Get your camera pointing at a 45 degree angle.
- The 3" x 1.75" flat surface must be free of oil and grease
- The surface is lightly sanded with the sandpaper in the kit
- The primer is applied and allowed to dry
- The clear plastic cover on the bottom of the adapter is removed and the adapter is positioned and firm pressure is applied for at least 30 seconds
- After the adapter is attached the mounting stud can be rotated 90 degrees by loosening the large nut, pushing the stud down, rotating the stud 90 degrees and retightening the nut
- The adapter is attached to the ball stud on the EZ-Aim Game Camera Mount and you are ready to go
The adapter has a weight of 3 ounces so you will not even notice that it has been added to your camera.